Code editors and AI coding tools · Researched comparison
Best Go Linters for Clean Code in 2026
golangci-lint is the first pick for most teams because it runs many linters in one pass and is the common entry point in CI. If you want a single focused analyzer with deep checks, use staticcheck. If you need a configurable replacement for the old golint style rules, use revive. All three are free and open source.
We run no ads and no affiliate links at launch. The order of a list follows our published method.
Prices are the starting prices vendors list publicly. Plans change, so confirm the current price on the vendor page before you buy.
Key takeaways
golangci-lint aggregates many linters, including staticcheck and revive, behind one config and one run.
staticcheck is a standalone analyzer with its own checks and can run on its own or inside golangci-lint.
revive is a configurable linter aimed at style and naming rules, positioned as a golint replacement.
All tools listed here are free and open source; check each repository for the current licence and Go version support.
Tool
Best for
Standout feature
Listed starting price
Free plan or trial
1 golangci-lint
Teams that want many linters in one CI run
Runs many linters together
Free (open source)
Free plan
2 staticcheck
Deep single-analyzer checks on Go code
Focused set of correctness and simplification checks
Free (open source)
Free plan
3 revive
Configurable style and naming rules
Rules are configurable in a TOML file
Free (open source)
Free plan
4 go vet
Built-in checks with no extra install
Ships with the Go toolchain
Free
Free plan
5 errcheck
Catching unchecked error returns
Focused on one common Go mistake
Free (open source)
Free plan
6 ineffassign
Finding assignments that are never used
Small and focused
Free (open source)
Free plan
7 misspell
Catching common spelling mistakes in comments and strings
Simple to run
Free (open source)
Free plan
How we picked
We picked tools that are real, currently maintained Go linters or lint runners with public repositories and documentation. Criteria were fit for the linting job, supported platforms, licence and price, how the tool fits into CI, and known limits such as narrow scope or noisy checks. Sources are vendor pages, project documentation and repositories. Prices and licences can change, so confirm details on the official site before you commit.
01
golangci-lint
Best for: Teams that want many linters in one CI run
golangci-lint is a runner that executes a set of Go linters over a codebase and reports combined results. It includes staticcheck, revive, govet and others, and lets you enable or disable each one in a YAML config. It runs on Linux, macOS and Windows and installs from a release binary, package managers or `go install`. It is the usual choice when a project wants one command in CI instead of wiring several linters by hand.
The main limit is configuration surface. Defaults change between versions, so pin a version in CI and review the config when you upgrade. Some checks overlap, and running every linter can slow large repositories. It is a good fit for teams that want a single gate; skip it if you only want one specific analyzer and prefer to run that tool directly.
Pros
Runs many linters together
single config file for a project
Cons
Configuration can grow complex
some linters are enabled by default and surprise new users
Price: Free (open source), as listed by the vendor (golangci-lint website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: configuration can grow complex.
Verdict. A sensible pick for teams that want many linters in one CI run.
02
staticcheck
Best for: Deep single-analyzer checks on Go code
staticcheck is a standalone static analysis tool for Go. It reports bugs, unused code, simplifications and other issues, and it can also run as a linter inside golangci-lint. It installs with `go install` and runs from the command line on Linux, macOS and Windows. Output can be filtered by check code, which helps when you want to suppress a specific rule.
The tool is opinionated. Some checks flag patterns that are valid but unusual, so teams sometimes disable individual checks rather than the whole tool. It does not try to enforce naming or formatting style, so pair it with a formatter such as gofmt and a style linter if you need that. It suits projects that want strong correctness checks without a large linter bundle.
Pros
Focused set of correctness and simplification checks
usable standalone or inside golangci-lint
Cons
Not a style linter
some checks may flag code you intentionally wrote
Price: Free (open source), as listed by the vendor (staticcheck website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: not a style linter.
Verdict. A sensible pick for deep single-analyzer checks on Go code.
03
revive
Best for: Configurable style and naming rules
revive is a Go linter focused on style and naming conventions. It is often described as a faster, configurable alternative to the deprecated golint. Rules are enabled and tuned in a TOML configuration file, and it can be run standalone or through golangci-lint. It installs with `go install` and runs on the common desktop platforms.
Because it targets style, it will not catch many logic bugs. Teams that want both style and correctness usually run revive alongside staticcheck or use golangci-lint to combine them. The configuration file is the main thing to review: defaults and rule names can change between releases, so pin a version and keep the config in the repository.
Pros
Rules are configurable in a TOML file
positioned as a golint replacement
Cons
Style rules are subjective
not a full correctness analyzer on its own
Price: Free (open source), as listed by the vendor (revive website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: style rules are subjective.
Verdict. A sensible pick for configurable style and naming rules.
04
go vet
Best for: Built-in checks with no extra install
go vet is the vet command included with the Go toolchain. It reports suspicious constructs such as printf format mismatches and some struct tag issues. Because it ships with Go, there is nothing extra to install, and it runs anywhere the Go toolchain runs. It is a baseline check that most projects should run in CI.
Its scope is narrow by design. It does not enforce naming or formatting style, and it will not replace a dedicated analyzer like staticcheck. Use it as the first gate, then add other linters for broader coverage. Since it is part of Go, its checks follow the Go release cycle, so behavior can change when you upgrade the toolchain.
Pros
Ships with the Go toolchain
no separate install step
Cons
Limited set of checks
not a style linter
Price: Free, as listed by the vendor (go vet website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: limited set of checks.
Verdict. A sensible pick for built-in checks with no extra install.
05
errcheck
Best for: Catching unchecked error returns
errcheck is a small linter that reports unchecked errors from function calls. Ignoring a returned error is a common Go bug, and errcheck flags those call sites. It installs with `go install` and runs from the command line. It is also available as a linter inside golangci-lint, which is how many teams use it.
The tool is narrow. It does not check style or other correctness issues. It can also flag deliberate ignores, so you need a way to exclude specific calls or files. That usually means a small exclude list or an inline comment, depending on how you run it. It suits projects that want a focused check on error handling rather than a broad linter bundle.
Pros
Focused on one common Go mistake
can be run standalone or via golangci-lint
Cons
Only checks error handling
noisy on code that intentionally ignores errors
Price: Free (open source), as listed by the vendor (errcheck website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: only checks error handling.
Verdict. A sensible pick for catching unchecked error returns.
06
ineffassign
Best for: Finding assignments that are never used
ineffassign reports ineffectual assignments, meaning values assigned to variables that are never read before being overwritten or going out of scope. It installs with `go install` and runs from the command line. It is also included as a linter in golangci-lint.
The check is narrow and best used as part of a set. On its own it will not catch much beyond dead assignments. During active refactoring it can produce findings for code that is temporarily incomplete, so some teams run it in CI rather than as a pre-commit hook. It is a reasonable addition for projects that want to catch leftover assignments.
Pros
Small and focused
catches dead assignments
Cons
Narrow scope
may flag code mid-refactor
Price: Free (open source), as listed by the vendor (ineffassign website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: narrow scope.
Verdict. A sensible pick for finding assignments that are never used.
07
misspell
Best for: Catching common spelling mistakes in comments and strings
misspell is a linter that finds commonly misspelled English words in source files, including comments and string literals. It installs with `go install` and runs from the command line, and it can also be used through golangci-lint. It supports a correction mode that rewrites files.
The tool relies on a fixed list of known misspellings, so it will not catch grammar issues or unusual typos. It is English-centric, which matters for projects with comments in other languages. Treat it as a small hygiene check rather than a core correctness linter, and review its output before applying automatic fixes.
Pros
Simple to run
can correct common misspellings
Cons
English-focused
limited to a fixed word list
Price: Free (open source), as listed by the vendor (misspell website). Confirm the current plan price before you buy.
Skip it if this limit matters to you: english-focused.
Verdict. A sensible pick for catching common spelling mistakes in comments and strings.
Who should use what
A team setting up CI for a large Go repository should start with golangci-lint and enable staticcheck and revive inside it. A developer who wants one strong correctness analyzer without a runner should use staticcheck directly. A project migrating away from golint style rules should look at revive with a TOML config. A small project that wants a baseline with no extra installs should run go vet from the Go toolchain, then add errcheck or ineffassign if error handling and dead assignments are a concern.
What to check before you buy
Confirm the linter supports your current Go version and check the release notes before upgrading.
Pin the linter version in CI so results do not change unexpectedly between runs.
Review default enabled checks, especially in golangci-lint, and disable what your team does not want.
Decide how to suppress findings, such as inline comments or exclude files, and document it.
Run the linter locally and in CI with the same config to avoid drift.
FAQ
Is golangci-lint a linter or a runner?
It is a runner. It executes many Go linters, including staticcheck and revive, and combines their output. You configure which linters run in a YAML file.
Do I need staticcheck if I already use golangci-lint?
Not necessarily. golangci-lint can run staticcheck for you. Running staticcheck directly is useful when you want only its checks and a smaller setup.
Is revive a drop-in replacement for golint?
revive is positioned as a configurable alternative to golint, which is deprecated. Rule names and defaults differ, so review the configuration rather than assuming identical output.
Are these linters free?
Yes. The tools listed here are free and open source or ship with the Go toolchain. Check each repository for the current licence.
Can I run these linters on Windows and macOS?
Yes. golangci-lint, staticcheck, revive and the smaller linters provide builds or install with `go install` on Linux, macOS and Windows. go vet ships with the Go toolchain on all supported platforms.